The Belkin Power Management Software Status screen provides a visual status-check of important
operating data such as input/output voltage, current, battery capacity, 
power loading and much more.  You could monitor your local UPS while 
simultaneously monitoring several network UPSs.

TO MONITOR YOUR LOCAL UPS
	1. Type "/etc/upsilon/upsilon status" to bring up the initial 
		select screen.  A short description and function key 
		definitions appear at the bottom of the screen.

	2. Press <enter>.  Belkin Power Management Software Status checks the configuration 
		settings.
		This screen appears if you configured Belkin Power Management Software 			
		to monitor the UPS from the local serial port.  
		Function key descriptions are at the bottom right 
		corner of the screen.
		This screen appears if you configured Belkin Power Management Software to 
		monitor the UPS through a local SNMP Agent.
		Press [m] to know more information such as system 
		contact, system name and system location.
		Press [b] to return to the first screen.

TO MONITOR A REMOTE UPS
	1. Type "/etc/upsilon/upsilon status" to bring up the initial 
		select screen.

	2. Press [r].  Fields where you could input the IP Address and 
		Community Name appears.

	3. Press [I].  Key in the IP Address of the remote SNMP 
		Adapter.  Press [enter] when through.
	
	4. Press [c].  Key in an appropriate Community Name for the 
		remote SNMP Adapter.  Press [enter] when through.

	5. Press [enter].  A screen displaying the UPS status appears.
		Press [m] to see more information such as system 
		contact, system name and  system location.
		Press [b] to continue viewing the UPS status.

